MAHA Archives - Far East Motors

MAHA Side Slip Tester MINC 2 VP420005

admin — Sun, 10 Jan 2021 02:12:54 +0000

The side-slip tester MINC II EURO ensures that the axle geometry is inspected within seconds once the test vehicle passes over it (up to 15.0 t axle load) as well as a fully automatic evaluation of the deviation in m/km. The display of the measurement values is either analogue via dial or via transmission to a PC screen (including graphic display).

The post MAHA Side Slip Tester MINC 2 VP420005 appeared first on Far East Motors.

MAHA Headlight Tester MLT 3000 VP185055

admin — Sun, 10 Jan 2021 02:10:45 +0000

Description:

Digital device for quick and objective testing and adjustment of vehicle headlights, taking into account statutory limits and OEM guidelines
Electronic levelling system to compensate for unevenness in the floor at the headlight tester installation site
7″ touch screen for menu navigation and display of measurement values
High dynamic range CMOS camera for capturing and digitising the headlight projection
Processor-supported unit control incl. flash memory
Digital analysis with evaluation of results
Optional interface for transmission of measurements to a PC
Powerful battery for cable-free long-term use
Robust construction, also suitable for test lanes
Rotatable mirror for device alignment to vehicle
Automatic latching of the light collecting box to the precision aluminium guide column facilitates handling and optimises reproducibility
Extremely thin Fresnel lens made from material with optimised refractive index for suppressing blue and red fringing increases measurement accuracy significantly
Large Fresnel lens for easy positioning in front of the headlights helps speed up the entire set-up process
Anodised heat deflection sheet to prevent overheating as a result of direct sunlight even without use of the device covering hood
Pre-configured as standard for use on optional guide rails so that equipment runs in straight line after alignment

The post MAHA Headlight Tester MLT 3000 VP185055 appeared first on Far East Motors.

MAHA Brake Tester MBT4250 EuroSystem VP410153

admin — Sun, 10 Jan 2021 02:08:30 +0000

The test-lane-compatible roller brake tester MBT 4250 EUROSYSTEM is designed for the brake testing of trucks with axle loads of up to 13.0 t. Its standard split design for pit installation ensures a high level of flexibility within the working area. As it is possible to connect additional EURO floor units, the brake tester can be used as a base module for the setting up of test lanes.

The post MAHA Brake Tester MBT4250 EuroSystem VP410153 appeared first on Far East Motors.

MAHA Performance Measurements MRS500/2 CAR 4WD VP230041

admin — Sun, 10 Jan 2021 02:02:31 +0000

The MSR 500/2 CAR 4WD single roller dynamometer is used in workshops for designers and tuners as well as in educational institutions. It is especially suitable for performance measurements, tuning and diagnostic work on particularly powerful vehicles. With test speeds of up to 300 km/h, it is used for dynamic and static power measurement. The MSR 500/2 CAR 4WD guarantees optimum measurement accuracy and reproducibility through the active measurement of the towing power.
The rolling behaviour of the tyre is the same as on the road. Operating methods such as load simulation, including optional modules for the measurement of external data, e.g. driving cycles, are possible.
The MSR 500/2 CAR 4WD can also be extended with a 3rd or 4th eddy current brake.

The post MAHA Performance Measurements MRS500/2 CAR 4WD VP230041 appeared first on Far East Motors.

MAHA Emission Testing MET 6.2

admin — Fri, 08 Jan 2021 16:15:53 +0000

The MET 6.2 opacimeter is designed for measuring diesel vehicles. Exhaust gas opacity and particle concentration are tested and analysed in a time-saving and trouble-free manner by using the partial flow method during free acceleration or when the engine is under load. Official German PTB-approval 18.09.

The post MAHA Emission Testing MET 6.2 appeared first on Far East Motors.

Forklift Lifter RGE-GPGU

admin — Fri, 08 Jan 2021 15:45:23 +0000

COLUMNLIFT | Mobile Wheel Engaging Column Lifts up to 7500 kg load capacity per column.

Description:

Very smooth running due to electro-mechanical drive system
High efficiency thanks to smooth-running, low-maintenance ball screw
5-year warrantee for entire spindle drive
Excellent lifting column mechanical rigidity guarantees safety and function under any conditions
Precision-height positioning without overrun thanks to high-quality worm gear motor
Universal lifting carriages with movable holder prongs specially for forklift trucks and special-purpose vehicles
Overhead drive unit creates even more space in the work area
Workshop-robust and splash-proof control unit
Wear-free and easy-to-use membrane keypad

Flexible column positioning thanks to excess-length connection cables, guaranteeing suitability across all vehicle categories
User convenience with panel operator controls on each individual column
High level of flexibility in use due to different operating modes
Group and individual column operating modes enable quick and easy replacement of wheel and axle suspensions
Microprocessor control and CAN bus-supported monitoring of movement synchronisation and all safety functions
Utmost safety thanks to mechanically independent locking device
Simple emergency lowering for power failure included as standard

System can easily be expanded with up to six columns
Universal holder can be exchanged for wheel support claws

Streamline COLUMNLIFT design aids manoeuvrability specifically in workstations with restricted space
High-quality powder coating available in a variety of colours

Standard Delivery:

2 individual mobile columns
1 connecting cable (10m) with plug and socket
1 mechanical dolly, repositionable

The post Forklift Lifter RGE-GPGU appeared first on Far East Motors.

Inground lifts VP252132

admin — Fri, 08 Jan 2021 15:40:16 +0000

The one post inground lift with flat head supports lifts cars and small vans up to 3 t.
The flat head support lift for sill area take-up impresses with its safe electro-hydraulic SOLIST lift unit. Suspended installation of the lift is simple and enables optimal introduction of forces into the workshop floor.

The post Inground lifts VP252132 appeared first on Far East Motors.

Mobile Column Lifts MCL 22VP

admin — Fri, 08 Jan 2021 15:23:19 +0000

The low-maintenance, electro-mechanical drive system ensures extremely smooth running while the excellent mechanical rigidity of the columns guarantees safety and the ability to function in any condition. A high-quality worm gear motor enables precision height positioning without overrun. Column communication is via connecting cable or wireless connection, the power supply via mains power or batteries. Thanks to the lift’s overall streamline design, it is ideal for sites with restricted space.

The post Mobile Column Lifts MCL 22VP appeared first on Far East Motors.