The Power Lift HF 4600 is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

• Lifting time: 35 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
• Load capacity: 4600 kg
• Less wear, less downtime for maintenance thanks to HyperFlow®
• Automatic safety latch (no clacking during lifting and lowering)
• Less wear : Fixed piping of all hydraulic connections
• Optional also with column extensions: Power Lift HF 4600 HSV
• Guaranteed quality: The hydraulic cylinders are individually tested before dispatch
• Developed and manufactured in Germany

The HF series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifts Made in Germany. With our specially developed, in-house technologies, we can provide you with an always perfect synchronisation without manual maintenance effort . The ergonomic operating lever Nussbaum-Commander enables sensitive, stepless lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 2050 mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.

The Power Lift HF 4600 is also available with optional riser tube extensions for lifting  high vehicles such as vans and transporters to the ideal working height for you: Power Lift HF 4600 HSV

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The Power Lift HF 4600 uses only fixed pipes for all hydraulic connections. The Power Lift HF 4600 are designed to be maintenance free throughout the life of the lift.

The oil submerged unit integrated in a sound-absorbing metal housing is mounted on the operating column and easily accessible for maintenance work. The columns and support arms are welded in Nussbaum’s own state-of-the-art welding facilities, shot-peened and subsequently blau powder-coated. Your lift is thus protected against dirt and weather in the long term. The design and the processing of the Power Lift HF 4600 give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

Scope of delivery

Hebebühne mit asymmetrischen teleskopierbaren Tragarmen, 4 im Tragarm fixierte Drehteller, Steuerung mittels Commanderhebel. Passive Sicherheitsklinke, bei Bedarf kann manuell über Drucktaster in Klinke abgesetzt werden.

Installation requirements

Fundamentstärke 250 mm C20/25 normale Bewehrung, 16 Dübel BM16-25/100/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Hydrauliköl HLP 32 ca. 10l, Entladung

The post Vehicle Two Post Lift HF4600 appeared first on Far East Motors.

• Lifting time: 35 seconds / Lowering time 30 seconds
• Capacity: 4000 kg
• Effective lifting height of 2000 mm
• Extremely flat construction: Drive-on height of only 135 mm
• Length-adjustable mounting – drive-on ramps can be locked and unlocked by one-hand operation
• Flexible mounting: Adjustable width, no compressed air access required
• 360° access
• Can also be installed flush with the floor
• Three times guaranteed quality: Power unit, hydraulic cylinder and the complete lifting platform are tested before dispatch.
• Developed and manufactured in Germany
• Recommended by BMW (for similar lifts Jumbo Lift 3200 NT, Jumbo Lift 4000 NT)

All hydraulic Jumbo lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum’s patented NT hydraulic technology is complemented by HyperFlow® technology, introduced in 2016 and unique worldwide. HyperFlow® automatically balances the pressure of the hydraulic circuits at each full stroke. There is no need for manual compensation or maintenance.

With the “Nussbaum Commander” we are the only manufacturer of lifting platforms in the world that can offer you a precise, variable lowering speed. The Nussbaum Commander enables sensitive lowering and allows the user to change and correct positions in no time at all, all with maximum safety. The Jumbo Lift 4000 NT HyperFlow is not only safe, but also exceptionally flexible and can be installed in different installation widths as required.

TheJumbo Lift 4000 NT HyperFlow requires no compressed air at all. The four hydraulic cylinders require very little energy. The low power consumption, the continuous automatic compensation of the hydraulic circuits by the HyperFlow® system and the low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs. The operating lever “Nussbaum Commander” is attached to the power unit integrated in a metal housing. The control unit is connected to the lift only by the hydraulic hoses and can be positioned freely around the lift. The hydraulic hoses can be mounted on the workshop floor or in a protective metal housing on the floor as required. The double scissors are welded in Nussbaum’s own state-of-the-art welding facilities, shot-peened and subsequently blau powder-coated. Your lifting platform is protected against dirt and weather for a long time.

The post Vehicle Scissors Lift Jumbo 4000 NT appeared first on Far East Motors.